Early testing of a pilot reactor
But what is the best configuration for a microalgae biofilm reactor? We had to consider specific process requirements, such as keeping the biofilm wet, supplying it with nutrients, exposing it to light, promoting the exchange of CO2 and oxygen with the atmosphere, and making the surface accessible for harvesting. Others have tried to meet these requirements by using a biofilm support that moves between a water phase and a gas/light phase, for example using a traveling band, rotating/floating cylinders, or moving cables. While a “moving biofilm” may check a lot of boxes, it results in a mechanically complex and expensive set of equipment that can be challenging to scale up.
We decided instead to grow microalgae on stationary cones. Our patent-pending cones hang from cables and maximize light utilization independent of sun position, which varies with season and time of the day. Since algae growth is a light conversion process, more light means more algae! We keep the cone bed wet using irrigation technology developed for agriculture that minimizes pumping energy. As water drips off the cones, it is collected by gravity, clarified, and then either discharged or recycled back to the cones. Periodically, we harvest the algae and then collect it from under the cones as a thick slurry. Depending on the application, this harvested algae can become fertilizer, animal feed, bioplastics, or biofuels.
Thanks for reading about our cone-shaped biofilms!

